| Customization: | Available |
|---|---|
| After-sales Service: | 2years |
| Warranty: | 2years |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Description: | ||||
| TRH3031 is a rigid moulded product grey in colour utilising Kevlar fibres and a high percentage of brass chippings. TRH3031 offers excellent thermal resistance, compression and exhibits outstanding stability under heavy loads, at the same time maintaining a high resistance to wear. TRH3031 is manufactured in sheets, segments, rings and many special shapes by either machining or moulding. | ||||
| Applications: | ||||
| TRH3031 has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength low wear material. TRH3031 also can be used in hydraulic oil, but the friction coefficient will be much lower than it is used in dry conditions. Gear tooth facing only can be produced by mould. |
||||
| Dimension: | ||||
| Length x Width: 508mm x 508mm (20inches x 20 inches) | ||||
| Thickness: 3.2mm-22mm ( 1/8 - 7/8 inch) | ||||
| Frictional Properties(SAE J661): | ||||
| Normal | 0.55 | |||
| Hot | 0.52 | |||
| 400°F | 0.54 | |||
| Mechanical properties: | ||||
| Tensile strength: | 31.54Mpa | |||
| Compression strength: | 110.27Mpa | |||
| Impact strength: | 0.92J/cm3 | |||
| Hardness(HRR): | 102 | |||
Recommended Operating Range: |
||||
| Max. Pressure, psi | 2000 | |||
| Max. Rubbing Speed, ft/min | 5000 | |||
| Max. Intermittent Temperature | 650°F (340°C) | |||
| Max. Continuous Temperature | 600°F (315°C) | |||
){kind=link}