TRH3028, Non Asbestos Gear Teeth Facing For Industrial Brake/ Clutch System, is a Non Asbestos resin moulded with exceedingly high hardness and strength. After being impregnated with special resin and pressed into rigid flat sheet, the material shows outstandingly good resistance to wear and compression and excellent stability.
TRH3028 is a heavy duty material extensively used in oil drilling and wind power industry. It can be installed in industrial brake and clutch system, power transmission system and electric magnetic brake engine.
Product Description: |
|
TRH3028 is a rigid moulded product red in colour utilising Kevlar fibres and a high percentage of brass chippings. TRH3028 offers excellent thermal resistance, compression and exhibits outstanding stability under heavy loads, at the same time maintaining a high resistance to wear. TRH3028 is manufactured in sheets, segments, rings and many special shapes by either machining or moulding. |
|
Applications: |
|
TRH3028 has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength low wear material. TRH3028 is intended for dry running applications only. Gear tooth facing only can be produced by mould. |
Dimension: |
|
|
|
Length x Width: 762mm x 762mm (30inches x 30 inches) |
|
Thickness: 3.2mm-22mm ( 1/8 - 7/8 inch) |
|
|
|
Frictional Properties: |
|
|
Normal |
0.54 |
|
Hot |
0.51 |
|
400°F |
0.52 |
Recommended Operating Range: |
|
|
|
Max. Pressure, psi |
300 |
|
Max. Rubbing Speed, ft/min |
5000 |
|
Max. Intermittent Temperature |
650°F (340°C) |
|
Max. Continuous Temperature |
600°F (315°C) |