Industrial Gear Teeth Facing Clutch Disc for 59 Teeth for Brake System

• Customization: Available
• Type: Brake System
• Material: Non-Asbestos
• Model NO.: TRH3028
• Position: Industrial Clutch
• Certification: ISO/TS16949, ISO9001
• Classification: Industrial Clutch
• Drum Brakes Classification: Industrial Clutch
• Main Market: North America, Africa, Western Europe, Oceania, Domestic Market
• Application1: Desch Brake Clutch
• Application2: Industrial Brake
• Size: 14 Inch 59 Teeth
• Color: Red
• Measurements: 385*248*16mm
• Transport Package: Cartom and Then Pallet
• Specification: as per required
• Trademark: TALFRI
• Origin: Guiyang, China
• HS Code: 8708301000
• Package Size: 45.00cm * 45.00cm * 30.00cm
• Package Gross Weight: 40.000kg

Product Description

Description of Brake Lining
TRH3028 is a rigid moulded product red in colour utilising Kevlar fibres and a high percentage of brass chippings. TRH3028 offers excellent thermal resistance, compression and exhibits outstanding stability under heavy loads, at the same time maintaining a high resistance to wear. TRH3028 is manufactured in sheets, segments, rings and many special shapes by either machining or moulding. 

Application
TRH3028 has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength low wear material. TRH3028 is intended for dry running applications only.

Features of Woven Resin Brake Lining Roll
1.   Good wear resistance
2.   Excellent heat resistance
3.   High tensile stength
4.   Suitable for industrial application

Dimension
Length x Width: 762mm x 762mm (30inches x 30 inches)
Thickness: 3.2mm-22mm ( 1/8 - 7/8 inch)

Frictional Properties
Normal 0.54
Hot 0.51
400°F 0.52

Recommended Operating Range
Max. Pressure, psi 300
Max. Rubbing Speed, ft/min 5000
Max. Intermittent Temperature 650°F (340°C)
Max. Continuous Temperature 600°F (315°C)
                  Product Data Sheet: TRH3028

Product Description:
TRH3028 is a rigid moulded product red in colour utilising Kevlar fibres and a high percentage of brass chippings. TRH3028 offers excellent thermal resistance, compression and exhibits outstanding stability under heavy loads, at the same time maintaining a high resistance to wear. TRH3028 is manufactured in sheets, segments, rings and many special shapes by either machining or moulding.
Applications:
TRH3028 has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength low wear material. TRH3028 is intended for dry running applications only. Gear tooth facing only can be produced by mould.
Dimension:
	Length x Width: 762mm x 762mm (30inches x 30 inches)
	Thickness: 3.2mm-22mm ( 1/8 - 7/8 inch)
Frictional Properties:
			Normal	0.54
			Hot	0.51
			400°F	0.52
Recommended Operating Range:
		Max. Pressure, psi		300
		Max. Rubbing Speed, ft/min		5000
		Max. Intermittent Temperature		650°F (340°C)
		Max. Continuous Temperature		600°F (315°C)