The friction block for cutting machine/Corrugated machine/facer is a rigid moulded product grey in colour utilising Kevlar fibres and a high percentage of brass chippings. This material offers excellent thermal resistance, compression and exhibits outstanding stability under heavy loads, at the same time maintaining a high resistance to wear.
The friction material has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength low wear material.
|
Frictional Properties(SAE J661): |
|
|
Normal |
0.55 |
|
Hot |
0.52 |
|
400°F |
0.54 |
|
|
|
Mechanical properties: |
|
Tensile strength: |
31.54Mpa |
Compression strength: |
110.27Mpa |
Impact strength: |
0.92J/cm3 |
Hardness(HRR): |
102 |
Recommended Operating Range: |
|
|
|
Max. Pressure, psi |
2000 |
|
Max. Rubbing Speed, ft/min |
5000 |
|
Max. Intermittent Temperature |
650°F (340°C) |
|
Max. Continuous Temperature |
600°F (315°C |